Wall Putty

Build Green Wall Putty is a white cement-based, polymer-modified wall putty specifically designed to serve as a base coat that conceals unevenness and pinholes on plastered mortar walls. It offers a smooth, shiny finish with the added benefits of UV resistance, strong adhesion, and high water resistance, helping to protect walls and ceilings from weathering. The 3S advantage ensures an enhanced surface for primer and paint application, contributing to a safe and aesthetically pleasing environment.

FEATURES

Increases Paint Coverage
Glossy Finish
Durable
Anti Fungal
No Curing Required
ECO Friendly
Easy for Application
Strong Adhesion
No need of primer before applying paint

HOW TO APPLY

Surface Preparation:

All Surfaces should be free from all dirt, oil, grease, loose sand particles, If it is old painted wall/lime washed wall then first scratch old surface. Dry and absorbent surfaces should be moistened/pre wet with clean water.

Mixing:

Use approximately 35 to 45% of fresh water for Build Green Wall Putty. l.e. Powder to water ratio. Mix thoroughly till uniform (free from bubbles and lumps) paste occurs. Allow paste to wait for 5-10 min. Adjust consistency if necessary. Remix and apply with putty blades.

Application:

Apply 2 coats of Build Green Wall Putty on the substrate with maximum total thickness 1.5mm with the putty blades. Ensure that the second coat application should be done when the first coat is totally dried/after min. 3hrs. Always prepare a required quantity of putty paste and use it within 2-3 hrs. To remove unevenness/application mark use emery paper more than 500 number.

COVERAGE

Approx 16 to 20 sft per kg for 2 coats with maximum thickness of 1.5 mm (Coverage will vary depending on absorption, flatness and evenness of substrate)

PACKAGING

1kg, 5kg, 20kg, 25kg & 40kg packs

TECHNICAL SPECIFICATION

PHYSICAL TEST	UNIT	RESULT
Whiteness	%	85
Pot Life(Open atmosphere)	min	90-120 min
Water demand by volume	%	35-45
Compressive strength at 28 days	Mpa	>6
Tensile Adhesion Strength at 14 days	Mpa	>1
Water retentivity	%	>98
Bulk density	Kg/m ³	1600-1700

(Actual field performance will depend on installation methods and site conditions.)

PRECAUTIONS

Do not directly apply on the fungus and moss affected areas.
Do not apply the material without pre-wetting the surface for the 1st coat.
Ensure the material is mixed homogeneously with water and allowed to stand for 5-10 mins before application.
Do not sand the material vigorously with Emery Paper otherwise it will reduce the strength of the material.
Do not apply the material to fill cracks.
Though the material is non-toxic, care should be taken to avoid dust inhalation while mixing & handling.

SAFETY FEATURES

Keep out of reach of children and away from food, drink May be harmful if swallowed. In case of ingestion seek immediate medical attention.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.

SHELF LIFE

12 months

*If stored in a dry area. "High humidity will reduce the shelf life of bagged product.